|
Base v1.2
|
|
Hits: 2 |
|
Date added: 01/04/2006 |
|
BASE is the Basic Analysis and Security Engine. It is based on the code from the Analysis Console for Intrusion Databases (ACID) project. This application provides a Web frontend to query and analyze the alerts coming from a Snort IDS. |
|
|
|
|
|
Authfail v1.1.4
|
|
Hits: 3 |
|
Date added: 02/14/2006 |
|
Authfail is a tool for adding IP addresses to an ACL when entities from those addresses attempt to log into a system, but cause authentication failures in auth.log. It reads data from auth.log in real time and adds the IP into netfilter with a DROP/REJECT policy. |
|
|
|
|
|
Atomic TimeSyns v1.03
|
|
Hits: 3 |
|
Date added: 01/27/2005 |
|
How do you set the time in your house? I don't mean do you know how to set the clock on your VCR, but what TIME do you actually enter? Do you just use the normal 'best guess' approach that practically everyone else does? If so, then get ready for the real deal - set your clock using THE timekeeping source, the National Institute of Standards and Technology. NIST maintains the primary frequency (time) standard for the United States, and operates a special server using the Network Time Protocol (NTP) to allow Internet users to get the time from them! Of course, if you're not based in the US, don't worry, you can go to the NTP Homepage and get a listing of servers worldwide, so you can pick the one closest to you.
Once ATS is set up, you can have it periodically set your system clock; plus it even has a built-in NTP server so you can synchronize all of your other computers quickly and easily! You can even specify a custom time offset to ensure that it sets your clock just the way you like it (I like my clocks 10 minutes fast, so I'm always a bit early). |
|
|
|
|
|
|
ApSniff
|
|
Hits: 5 |
|
Date added: 07/15/2005 |
|
ApSniff is a wireless (802.11) access point sniffer for Windows 2000. It enables you to list all access points broadcasting beacon signals at your location. Useful for helping you set new access points making sure you do not have interfering APs, and helping you set-up wireless clients by providing you with the client configuration information. Requires WLAN cards of Prism 2 chipset. It works with a DLINK DWL-650 and linksys WPC11. |
|
|
|
|
|
ApplyIt! Network Tools
|
|
Hits: 8 |
|
Date added: 02/18/2005 |
|
This zip package contains:
Network Tools Installation Package
License Agreement
Readme.txt
file_id.diz |
|
|
|
