|
TcpView
|
|
Hits: 28 |
|
Date added: 10/01/2005 |
|
Very useful tool that associates to each running process the internet ports it works on |
|
|
|
|
|
Fragroute v1.2
|
|
Hits: 30 |
|
Date added: 07/09/2005 |
|
fragroute intercepts, modifies, and rewrites egress traffic destined for a specified host, implementing most of the attacks described in the Secure Networks "Insertion, Evasion, and Denial of Service: Eluding Network Intrusion Detection" paper of January 1998.
It features a simple ruleset language to delay, duplicate, drop, fragment, overlap, print, reorder, segment, source-route, or otherwise monkey with all outbound packets destined for a target host, with minimal support for randomized or probabilistic behaviour.
This tool was written in good faith to aid in the testing of network intrusion detection systems, firewalls, and basic TCP/IP stack behaviour. Please do not abuse this software.
Required libraries:
* libdnet
http://www.hackerscenter.com/downloads/download.asp?id=329
http://www.hackerscenter.com/downloads/download.asp?id=330 (Win32)
* libpcap
http://www.hackerscenter.com/downloads/download.asp?id=320
* libevent (for non-Windows platforms)
http://www.hackerscenter.com/downloads/download.asp?id=333
Supported platforms:
* BSD (OpenBSD, FreeBSD, NetBSD, BSD/OS, MacOS X)
o OpenBSD < 3.1 loopback patch - allow setting of loopback MTU
* Linux (Redhat, Debian, Slackware, ...)
* Solaris
o Universal TUN/TAP driver for sparc64 - local pkg
o Universal TUN/TAP driver for x86
* Windows 2000
o CIPE-Win32 driver - required for fragroute
o WinPcap driver - required for fragtest
|
|
|
|
|
|
Tool Pack
|
|
Hits: 31 |
|
Date added: 10/24/2005 |
|
This Pack includes NTRegmon (scans your pc for all active registry, Netbus Protection (runs in back round of pc looking for NetBus trojan) and Ultimate Brodcast scanner (scanns mass IPs) |
|
|
|
|
|
|
Xprobe2 v0.3
|
|
Hits: 33 |
|
Date added: 12/03/2005 |
|
Xprobe2 is a remote active operating system fingerprinting tool which uses advanced techniques, some which where first to be introduced with Xprobe2, such as the usage of statistical analysis ('fuzzy logic') to match between probe response(s) to its signature database and others, in order to provide with accurate results regarding the underlying operating system of a probed element(s). |
|
|
|
|
|
Analyzer-Domain Protocol Analy
|
|
Hits: 35 |
|
Date added: 07/02/2005 |
|
Analyzer-A public domain protocol analyzer
Analyzer is a full configurable network analyzer program for Win32 environment. Analyzer is able to capture packets on all platforms (and link-layer technologies) supported by WinPcap, except for Windows 95.
This program is current being developed at Politecnico di Torino; main contributors include Loris Degioanni, Paolo Politano, Fulvio Risso and Piero Viano and it is released under a BSD-style licence.
This work has been partially sponsored by Microsoft Research and Telecom Italia Labs.
WARNINGS:
* Analyzer is a tool that is still under development. Please be patient when you use it.
* Analyzer does not work with Windows 95.
YOU MUST FOLLOWE THE FOLLOWING STEPS TO INSTALL:
1
De-install all the previous version of the capture drivers (and WinPcap) prior of release 2.1
2
Reboot the machine
3
Make sure that there is not any packet.dll and packet.vxd (on Win 95/98) or packet.sys (on NT/2000) on your system. If they are still present, please delete them manually
4
Install the latest version of WinPcap
5
Read carefully the WinPcap installation instructions (and the FAQ page)
6
Reboot the machine
7
Download the latest Analyzer release that comes under the form of a compress executable
8
Decompress the program into the destination folder on the hard disk
9
Analyzer does not need any installation. Analyzer can be launched by double-clinking on the Analyzer.exe executable
10
If anything goes wrong, please check at the Help page
WinPcap:
http://www.hackerscenter.com/downloads/download.asp?id=292
WinPcap Source Code:
http://www.hackerscenter.com/downloads/download.asp?id=293 |
|
|
|
