|
Snr v0.98
|
|
Hits: 10 |
|
Date added: 09/11/2005 |
|
Helps network administrator to collect signal/noice-rate statistics from Lucent Wireless AccessPoint devices via SNMP, store it into MySQL database and view summary graphs via CGI-module. |
|
|
|
|
|
|
gWireless v0.8
|
|
Hits: 22 |
|
Date added: 09/08/2005 |
|
This project aims to create a GNOME-based panel applet and management tool to manage wireless network cards that support Linux wireless extensions. You can find a list of such cards at Jean Tourrilhes's Linux Wireless LANs page. Many IEEE 802.11 compatible cards fall into this category, including the Lucent Orinoco and Applet Airport.
The complete set of tools is called gWireless. Currently, gWireless consists of two basic tools which are in early development stages. The most visible tool (and one that works with basic functionality today) is a link quality monitor applet (called gwireless_applet). Quality is displayed by altering green and red values of the applet. The better the link quality, the more green the display. Red values are the complement (? ... max - green value) of the green values (for example, if green is 255 then red is 0, green 200 then red 55, etc.). So, red is bad, orange (or muddy brown) is moderate to poor, and green is good. The applet will display blue if there are no wireless adapters listed in /proc/net/wireless. |
|
|
|
|
|
|
Wellenreiter v1.9
|
|
Hits: 42 |
|
Date added: 09/08/2005 |
|
Wellenreiter is a wireless network discovery and auditing tool. Prism2, Lucent, and Cisco based cards are supported. It is the easiest to use Linux scanning tool. No card configuration has to be done anymore. The whole look and feel is pretty self-explaining. It can discover networks (BSS/IBSS), and detects ESSID broadcasting or non-broadcasting networks and their WEP capabilities and the manufacturer automatically. DHCP and ARP traffic are decoded and displayed to give you further information about the networks. An ethereal/tcpdump-compatible dumpfile and an Application savefile will be automaticly created. Using a supported GPS device and the gpsd you can track the location of the discovered networks. NO!, hosap drivers actualy don't work in the perl version.
The project has started to move from perl to C++. Currently there are two flavours of Wellenreiter available. One is the perl/gtk based Version, with all the described functionality. The second one is the Wellenreiter II C++ based flavour. This runs on Handhelds (Zaurus/Ipaq/etc.) within the Opie environment and on X11. |
|
|
|
|
|
|
THC Wardrive v2.3
|
|
Hits: 22 |
|
Date added: 09/08/2005 |
|
THC-wardrive is a tool for mapping your city for wavelan networks with a GPS device while you are driving a car or walking through the streets. It is effective and flexible, a must-download for all wavelan nerds. |
|
|
|
|
|
|
Btscanner
|
|
Hits: 18 |
|
Date added: 09/08/2005 |
|
btscanner is a tool designed specifically to extract as much information as possible from a Bluetooth device without the requirement to pair. A detailed information screen extracts HCI and SDP information, and maintains an open connection to monitor the RSSI and link quality. btscanner is based on the BlueZ Bluetooth stack, which is included with recent Linux kernels, and the the BlueZ toolset. btscanner also contains a complete listing of the IEEE OUI numbers and class lookup tables. Using the information gathered from these sources it is possible to make educated guesses as to the host device type.
md5: 6bfaaad5a3730f10d07500fb3ec8c797 btscanner-1.0.tar.gz |
|
|
|
